Availability: | |
---|---|
Product Advantage | Product Parameters | ||
Mechanical Compression Biosafety Air Tight Door: | Inflatable sealed Biosafety Air Tight Door: | 1.Sealing: The initial positive and negative pressure test should be above 1500pa, and the leakage rate should not be less than 0.1% of the sealed chamber volume | |
1.304 stainless steel | 1.Sealing: The initial positive and negative pressure test is 2500pa, and the leakage rate is not less than 0.1% of the volume. | 2. Be made of stainless steel 304 material, with a thickness of no less than 2.5mm for the door frame and no less than 1.5mm for the door leaf. | |
2.The thickness of the window shall not be less than 12mm. | 2.304 material, with a door frame thickness of no less than 2.5mm and a door leaf thickness of no less than 1.5mm. | 3.The overall process adopts a fully welded structure, ensuring that the surface flatness of the door does not exceed 1mm within a range of 1 meter; | |
3.With no less than 6 compression points. | 3.The overall process adopts a fully welded structure. | 4.The inflatable sealing strip is imported from Europe, with a size of 32 * 16mm and made of high-density EPDM rubber. | |
4.Sealing: The initial positive and negative pressure test should be above 1500pa | 4.with a size of 32 * 16mm and a material of high-density EPDM; | 5.The control system reserves signal lines for opening and closing doors, air pressure alarms, etc; | |
5.The sealing strip is made of high-density material, and the door is equipped with interlocking and alarm signal lines. | 5.The control system reserves signal lines for door opening and closing status, air pressure alarm, etc. | 6.The mechanical compression type Biosafety Air Tight Door compression mechanism adopts a connecting rod mechanism. | |
6.Obtain a formal verification report from a third-party national inspection center. | 7.The mechanical clamping mechanism adopts a multi-point clamping type. |
Product Advantage | Product Parameters | ||
Mechanical Compression Biosafety Air Tight Door: | Inflatable sealed Biosafety Air Tight Door: | 1.Sealing: The initial positive and negative pressure test should be above 1500pa, and the leakage rate should not be less than 0.1% of the sealed chamber volume | |
1.304 stainless steel | 1.Sealing: The initial positive and negative pressure test is 2500pa, and the leakage rate is not less than 0.1% of the volume. | 2. Be made of stainless steel 304 material, with a thickness of no less than 2.5mm for the door frame and no less than 1.5mm for the door leaf. | |
2.The thickness of the window shall not be less than 12mm. | 2.304 material, with a door frame thickness of no less than 2.5mm and a door leaf thickness of no less than 1.5mm. | 3.The overall process adopts a fully welded structure, ensuring that the surface flatness of the door does not exceed 1mm within a range of 1 meter; | |
3.With no less than 6 compression points. | 3.The overall process adopts a fully welded structure. | 4.The inflatable sealing strip is imported from Europe, with a size of 32 * 16mm and made of high-density EPDM rubber. | |
4.Sealing: The initial positive and negative pressure test should be above 1500pa | 4.with a size of 32 * 16mm and a material of high-density EPDM; | 5.The control system reserves signal lines for opening and closing doors, air pressure alarms, etc; | |
5.The sealing strip is made of high-density material, and the door is equipped with interlocking and alarm signal lines. | 5.The control system reserves signal lines for door opening and closing status, air pressure alarm, etc. | 6.The mechanical compression type Biosafety Air Tight Door compression mechanism adopts a connecting rod mechanism. | |
6.Obtain a formal verification report from a third-party national inspection center. | 7.The mechanical clamping mechanism adopts a multi-point clamping type. |